Item number: M535D
The PROFITEST MXTRA IQ provides all measuring and test functions for testing the effectiveness of protective measures at stationary electrical installations – with predefined, or optionally with programmable test sequences which are required in accordance with test standards IEC 60364-6 (DIN VDE 0100-600) and EN 50110-1 (DIN VDE 0105-100). Measuring category: 300 V CAT IV/ 600 V CAT III.
The PROFITEST MXTRA IQ makes your investment decision easy because it’s the ideal test instrument for your routine daily work – day after day – thanks to the scope of functions which is perfectly matched to your requirements. Test report generation is quick and easy thanks to optimized operation and the practical memory concept. Furthermore, once a system structure has been created it can be used for all PROFITEST instruments – from Intro to Master. As a result, all employees conduct testing in exactly the same way. And with the PROFITEST service guarantee, you can be sure that your test instrument will still be up to date even 10 years down the road.
PROFITEST – versatile and future-proof
PROFITEST – saves time and money
PROFITEST – even 10 years down the road
PROFITEST – quick and easy report generation
PROFITEST – reliable measuring and testing
Testing of the effectiveness of protective measures at stationary electrical installations per IEC 60364-6 (DIN VDE 0100-600), EN 50110-1 (DIN VDE 0105-100), EN 60204-1 (VDE 0113-1), and other country-specific standards. Testing of electric charging stations per EN 61851-1 (DIN VDE 0122-1), and earth measurements
Innovative, global operating concept
User-friendly
Modern data management
Unique storage concept
Push-print function
Test sequences
Universal interface
1 PROFITEST MXTRA IQ
1 Earthing contact plug insert (country-specific)
1 Two-pole measuring adapter
1 Cable for expansion into a 3-pole adapter (PRO-A3-II)
2 Alligator clips
1 Neck strap
1 Set of rechargeable batteries (Z502H)
1 Charger (Z502R)
1 Condensed operating instructions
1 Supplementary sheet with safety information
1 DAkkS calibration certificate
1 USB interface cable
1 IZYTRONIQ Business Starter software
M536C
discontinued
"XTRA IQ starter package” test instrument set for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing, especially for the fulfillment of DGUV regulation 3.
Consists of the following accessories:
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Plastic System Case for Testers and Accessories
Foam insert for tester PROFITEST MASTER and accessories
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
M536D
discontinued
“XTRA IQ master package” test instrument set for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing, especially for the fulfillment of DGUV regulation 3.
Consists of the following accessories:
Plug Inserts for PROFiTEST - for PE Measurements and the like
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Plug Inserts for Germany - SCHUKO System, Angled
Aluminium Case for Testers and Accessories
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
M536E
discontinued
“MED package XTRA IQ” test instrument set for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing, especially for the fulfillment of DGUV regulation 3
Consists of the following accessories:
Plug Inserts for PROFiTEST - for PE Measurements and the like
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Leakage Current Measuring Adapter for PROFITEST MXTRA
Aluminium Case for Testers and Accessories
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
M536F
discontinued
“Profi package XTRA IQ” test instrument set for testing the effectiveness of protective measures at stationary electrical installations after completion, repair or expansion, and for periodic testing, especially for the fulfillment of DGUV regulation 3
Consists of the following accessories:
Current Sensor Clamp 1/10/100/1000 AAC, selectable
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Clamp Adapter for Connecting a Clamp Meter to the Test Plug
Plug Inserts for Germany - SCHUKO System, Angled
Aluminium Case for Testers and Accessories
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
Current Clamp Generator 0.2 ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Firmware update for PROFITEST Series
Virtual COM port for measuring and testing instruments
Plug Inserts for Germany - SCHUKO System, Angled
Adapter for Connecting 4 Wires for Earth Measurement
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
Current Sensor Clamp, 1mA ..15A / ..150AAC, adjustable
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Clamp Adapter for Connecting a Clamp Meter to the Test Plug
Current Sensor Clamp 1/10/100/1000 AAC, selectable
Plastic System Case for Testers and Accessories
Plug Inserts for according to SEV
Flat Test Clip, CAT IV @ 1000 V, 32A for PROFITEST Master
Aluminium Case for Testers and Accessories
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Calibration Adapter for Insulation and Resistance Measuring Instruments
Universal Carrying Bag
Floor Probe
Plug Inserts for PROFiTEST - for PE Measurements and the like
Barcode Entry Tool (CODE 128)
Leakage Current Measuring Adapter for PROFITEST MXTRA
Universal Carrying Pouch Big
Cable Set for Testers
Plug Inserts for PROFiTEST with 3 Connector Cables for Any Connection Standards
Adapter for Testing Single-Phase Extension Cables (Straight Cable)
Ever-ready Case for PROFITEST MASTER with Outside Pocket for Accessories
Plug Inserts for Germany - SCHUKO System
Barcode Scanner with Laser for Test Instruments with RS 232 Port
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Flexible Current Sensor 3/30/300 A, 1V-10mV/A, Loop length 450 mm
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
Trolley for Cases
Aluminium Case for Testers and Accessories
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Magnetic Measuring Tips with Contact Protection - Set with Magnetic Holder
Current Clamp Generator 0.2 ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Adapter for standards-compliant testing of single and 3-phase, mode 2 and 3 charging cables with simulation of faults in accordance with DIN VDE 0701-0702 and the manufacturer’s specifications
Foam insert for tester PROFITEST MASTER and accessories
Variable Plug Adapter Set
Do you have any questions on the product or do you need technical information or details on the current delivery period? Our sales backoffice will be pleased to assist you.
Sales International:
Telephone: +49 911 8602-0
Send message
Under myGMC you can register your product and receive up-to-date information on firmware updates, modifications of standards and many more topics.
Vielen Dank für Ihr Interesse! Wir werden uns umgehend um Ihre Anfrage kümmern.